When we get an order, we start getting the models ready. We carefully check and assess the supports, which are important for a good print. After setting up the files and choosing the print settings, we create the file needed for our printers to start printing. The printing time varies, from 4 hours for small models to up to 14 hours for bigger ones, depending on their size.

Following printing, we detach the miniatures from the build plate and cleanse them with alcohol. Subsequently, we remove supports and cure the models using UV light. After curing, the final finishing process begins. We sand and eliminate any remaining support marks. If you have purchased the primer painting service, we proceed with it accordingly. We paint everything using primer sprays from Vallejo.

• All models are printed under licenses we hold from the artists we collaborate with; learn more about our partnered artists...
• We utilize 14K printers from Phrozen and Anycubic.
• A blend of Siraya resins is used.
• Print layers have a height of 0.04mm.
• Print layers will always be visible.
• Support areas may be noticeable.
• The scales between different creators can vary. The difference between 28-32-38 millimeters is about 15% up or down from 32mm. If you're unsure about the size, feel free to reach out to us, and we'll assist you.